Cross-Sectional Staining and Surface Properties of DDGS Particles and Their Influence on Flowability

dc.citation.doi10.1094/CCHEM-86-4-0410en_US
dc.citation.epage420en_US
dc.citation.issue4en_US
dc.citation.jtitleCereal Chemistryen_US
dc.citation.spage410en_US
dc.citation.volume86en_US
dc.contributor.authorBhadra, Rumela
dc.contributor.authorRosentrater, Kurt A.
dc.contributor.authorMuthukumarappan, K.
dc.contributor.authoreidrbhadraen_US
dc.date.accessioned2014-05-30T16:15:58Z
dc.date.available2014-05-30T16:15:58Z
dc.date.issued2009-07-01
dc.date.published2009en_US
dc.description.abstractWith the U.S. fuel ethanol industry projected to grow during the next several years, supplies of distillers dried grains with solubles (DDGS) are anticipated to continue to grow as well. DDGS is used primarily as livestock feed. Much of the DDGS must be shipped, often over large distances, outside the Corn Belt (which is where most of the corn-based ethanol plants are currently located). Stickiness and caking among particles is a common issue for DDGS, and it often leads to flowability problems. To address this, the objective of this study was to understand the cross-sectional and surface natures of DDGS particles from five ethanol plants, and how they interact with DDGS properties. This study examined the distribution patterns of chemical components within cross-sections, within section edges (i.e., surface layers), and on surfaces using standard staining techniques; chemical composition was determined using standard protocols; and physical and flowability properties were also determined. Crude protein in the samples was 28.33–30.65% db, crude fat was 9.40–10.98% db, and neutral detergent fiber (NDF) was 31.84–39.90% db. Moisture contents were 4.61–8.08% db, and geometric mean diameters were 0.37–0.52 mm. Cross-sectional staining showed protein levels of 19.57–40.39%, and carbohydrate levels of 22.17–43.06%, depending on the particle size examined and the production plant from which the DDGS was sampled. Staining of DDGS particles indicated a higher amount of surface layer protein compared with carbohydrate thickness in DDGS particles that had a lower flow function index (which indicated potential flow issues). Additionally, surface fat staining suggested that higher surface fat also occurred in samples with worse flow problems. This study represents another step toward understanding why DDGS particles stick together during storage and transport, and will hopefully help to improve DDGS material handling strategies.en_US
dc.identifier.urihttp://hdl.handle.net/2097/17810
dc.language.isoen_USen_US
dc.relation.urihttps://doi.org/10.1094/CCHEM-86-4-0410
dc.rightsThis Item is protected by copyright and/or related rights. You are free to use this Item in any way that is permitted by the copyright and related rights legislation that applies to your use. For other uses you need to obtain permission from the rights-holder(s).
dc.rights.urihttp://rightsstatements.org/vocab/InC/1.0/
dc.subjectCross-sectional surface propertiesen_US
dc.subjectCross-sectional staining propertiesen_US
dc.subjectDistillers dried grains with solubles (DDGS)en_US
dc.subjectFlowabilityen_US
dc.titleCross-Sectional Staining and Surface Properties of DDGS Particles and Their Influence on Flowabilityen_US
dc.typeArticle (publisher version)en_US

Files

Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
BhadraCerChem2009.pdf
Size:
445.74 KB
Format:
Adobe Portable Document Format
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.62 KB
Format:
Item-specific license agreed upon to submission
Description: