Experimental investigation on the effects of channel material, size, and oil viscosity in horizontal mini-channels

dc.contributor.authorBultongez, Kevin Kombo
dc.date.accessioned2017-05-05T19:24:37Z
dc.date.available2017-05-05T19:24:37Z
dc.date.graduationmonthAugust
dc.date.issued2017-08-01
dc.description.abstractOil-water separation is an important process in the petroleum industry. This research investigates the use of surface tension forces to improve current oil-water separation technologies. An understanding of oil-water flows in surface tension driven mini-channels is necessary. This work investigates the effects of mini-channel wall material and tube diameter, along with oil viscosity, on flow regimes and pressure drops in mini-channel oil-water flows. A horizontal closed-loop, adiabatic experimental apparatus was constructed and validated using single-phase water. 2.1-mm and 3.7-mm borosilicate glass, 3.7-mm stainless steel and 4.0-mm Inconel tubes, resulting in Eötvös numbers of 0.2, 0.6 and 0.7 were tested. The experimental data were analyzed and compared using two mineral oils (i.e., Parol 70 and 100) with densities of 840 kg/m³ for both and viscosities of 11.7 and 20.8 mPa-s, respectively. Experiments included a wide range of oil superficial velocities (e.g., 0.28-6.82 m/s for glass, 0.28-2.80 m/s for stainless steel and 0.21-2.89 for Inconel) and water superficial velocities (e.g., 0.07-6.77 for glass, 0.07-4.20 m/s for stainless steel and 0.06-3.86 m/s). Flow regimes were observed and classified as stratified, annular, intermittent, and dispersed flow regimes. Effects of tube diameter were observed. For example, the 2.1-mm glass tube had the smaller range of stratified flows and the larger range of annular and intermittent flows compared to the 3.7-mm glass tube. At the same oil and water superficial velocities and relatively the same flow regime, stainless steel and Inconel always displayed higher pressure drop than the glass tube. However, pressure drops were a strong function of flow regime; lowest pressure drops were found for annular flows and highest pressure drops for dispersed flows. Flow regime maps and pressure drop graphs were created. Overall effects of oil viscosity were modest; however, an increase in oil viscosity enhanced flow stability which affected flow regime transition points.
dc.description.advisorMelanie M. Derby
dc.description.degreeMaster of Science
dc.description.departmentDepartment of Mechanical and Nuclear Engineering
dc.description.levelMasters
dc.description.sponsorshipOneSubsea
dc.identifier.urihttp://hdl.handle.net/2097/35568
dc.language.isoen_US
dc.publisherKansas State University
dc.rights© the author. This Item is protected by copyright and/or related rights. You are free to use this Item in any way that is permitted by the copyright and related rights legislation that applies to your use. For other uses you need to obtain permission from the rights-holder(s).
dc.rights.urihttp://rightsstatements.org/vocab/InC/1.0/
dc.subjectFlow regime
dc.subjectOil-water
dc.subjectMicro and mini-channel
dc.subjectEötvös number
dc.titleExperimental investigation on the effects of channel material, size, and oil viscosity in horizontal mini-channels
dc.typeThesis

Files

Original bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
KevinBultongez2017.pdf
Size:
1.52 MB
Format:
Adobe Portable Document Format
Description:

License bundle

Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.62 KB
Format:
Item-specific license agreed upon to submission
Description: