<link rel="stylesheet" href="styles.cf390c6bfbe7555f.css">
dc.contributor.authorGalipothu, Vikas Kumar
dc.date.accessioned2026-11-17T19:35:35Z
dc.date.graduationmonthDecember
dc.date.issued2026
dc.description.abstractListeria monocytogenes is a major foodborne pathogen and a significant food-safety concern in the fresh produce industry, and it has been associated with multiple produce-related foodborne illness outbreaks. It can survive under diverse environmental conditions and persist on food-contact surfaces as free-living planktonic cells, attached sessile cells, or within protective biofilms. Controlling Listeria on food-contact surfaces is particularly challenging for the organic fresh produce industry because organic growers have limited sanitation options and must use sanitizers approved under the National Organic Program. This dissertation evaluated the efficacy of a novel ultraviolet-C (UV-C) decontamination tunnel that houses UV-C irradiation and aqueous sanitizer mist to control Listeria spp. on food-contact surfaces commonly used in the organic produce industry. The UV-C decontamination tunnel’s novelty lies in the arrangement and integration of UV-C and the sanitizer system inside the decontamination tunnel. The UV-C light system was equipped with 16 low-pressure mercury lamps, arranged into four modules along the conveyor belt, while the sanitizer spray system comprised four independently operated modules, each equipped with seven nozzles for a total of 28 nozzles that delivered sanitizer as a mist. The first study evaluated the individual effects of UV-C irradiation and sanitizer application, as well as spatial coverage, on reducing sessile Listeria innocua on stainless steel and high-density polyethylene (HDPE) surfaces. Food-contact surface coupons (3’’ x 3’’) were placed in six orientations on the conveyor belt (P1 = vertically on the right side, P2 = flat at the center, treated the lower inoculated surface, P3 = flat at the center, treated the upper inoculated surface, P4 = vertically at the center facing the entry side, P5 = vertically at the center facing the exit side, and P6 = vertically on the left side) to simulate differently oriented food-contact surfaces. The coupons were treated at a conveyor belt speed of 1.68 m/min, corresponding to a residence time of 65 ± 2 seconds. Each treatment effect (UV-C and 120 ppm peracetic acid [PAA]) was evaluated in three experimental trials (n=3). Listeria populations were analyzed using a linear mixed-effects model, with experimental replicates as a random effect. A single UV-C module significantly reduced Listeria populations below the detectable levels (0.54 log CFU/cm2) on both surfaces across positions (p < 0.0001). 120 ppm peracetic acid (PAA) significantly reduced Listeria populations across all positions (P1-P6) (p < 0.05), except at P2 (inverted orientation), where the inoculated surface faced downward. These findings show that a single module can substantially reduce sessile Listeria populations within 65 ± 2 seconds, although efficacy varies by surface orientation and treatment type. The second study evaluated individual and combined UV-C treatments with PAA (120 ppm) against Listeria innocua biofilms on stainless-steel surfaces and HDPE coupons. Each treatment combination was evaluated in three independent experimental trials (n = 3). The effects of module configuration (one module [M1] or four modules [M4]) and coupon orientation on the conveyor belt (P1 [vertically positioned, facing the right and left sides inside the tunnel], P2 [flat positioned], and P3 [vertically positioned, facing the entry and exit sides inside the tunnel]) on treatment efficacy were also investigated. UV-C treatment alone did not significantly reduce microbial populations under the evaluated conditions (p > 0.05), whereas PAA were effective when applied across four modules (M4), compared with single-module (M1) treatments (p < 0.05). Among the evaluated treatments, the combination of four UV-C modules and PAA, applied at a lower conveyor belt speed (0.66 m/min) to provide a residence time of 164 ± 3 seconds, yielded a significant reduction of 5–6 log CFU/cm² (p < 0.05) across both surfaces and positions. These findings highlight the importance of integrating UV-C with an aqueous sanitizer and optimizing module configuration and contact time to improve biofilm control. The effectiveness of UV-C decontamination was further evaluated under commercial farm conditions at two farms in Kansas. The study was conducted as three independent trials at each farm (n=3). The two treatments, UV-C with 4% lactic acid (T2) and UV-C with 120 ppm peracetic acid (T3), were compared with an untreated control to evaluate their efficacy in reducing microbial contamination on harvest bins, which are commonly used food-contact surfaces in the fresh produce industry. Both combined treatments significantly reduced microbial indicator populations, aerobic counts, coliforms, and yeast and mold, as well as chemical indicator adenosine triphosphate (ATP) levels, compared with the untreated control (p<0.05). Microbial reductions were approximately 1-2 log CFU/100 cm², though they varied by treatment and microbial indicator. These results demonstrate the decontamination tunnel's potential for commercial sanitation applications, while indicating that its performance under farm conditions was lower than the reductions achieved against sessile Listeria and biofilms in laboratory experiments. In summary, these studies collectively demonstrate the potential of a modular UV-C decontamination tunnel that integrates UV-C irradiation and an aqueous sanitizer mist to improve sanitation of food contact surfaces used in the organic fresh produce industry. The independently operated modules provide flexibility in treatment configuration, while the integrated system offers a practical approach to combining physical and chemical sanitation strategies. Although lab results demonstrated substantial reductions in sessile Listeria populations and biofilms under optimized conditions, field validation showed more moderate reductions in microbial indicators on harvest bins. Further optimization of treatment configurations, contact time, and operating conditions is needed to improve sanitation performance under commercial conditions and support practical implementation in the organic fresh produce industry.
dc.description.advisorManreet S. Bhullar
dc.description.degreeDoctor of Philosophy
dc.description.departmentDepartment of Horticulture and Natural Resources
dc.description.levelDoctoral
dc.description.sponsorshipUnited States Department of Agriculture, National Institute of Food and Agriculture
dc.identifier.urihttps://hdl.handle.net/2097/47546
dc.language.isoen_US
dc.subjectUltraviolet-C (UV-C), Chemical sanitizers, Listeria, Biofilm, Fresh produce safety, Food-contact surfaces
dc.titleDevelopment and validation of a UV-C decontamination tunnel to control Listeria spp. on food-contact surfaces in the organic fresh produce industry
dc.typeDissertation
local.embargo.terms2027-06-28

Files

Original bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
VikasKumarGalipothu2026.pdf
Size:
12.34 MB
Format:
Adobe Portable Document Format

License bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
1.65 KB
Format:
Item-specific license agreed upon to submission
Description: