Tolerance of foxtail, proso and pearl millets to saflufenacil

K-REx Repository

Show simple item record

dc.contributor.author Reddy, Seshadri S.
dc.contributor.author Stahlman, Phillip W.
dc.contributor.author Geier, Patrick W.
dc.contributor.author Charvat, Leo D.
dc.contributor.author Wilson, Robert G.
dc.contributor.author Moechnig, Michael J.
dc.date.accessioned 2014-04-25T21:17:52Z
dc.date.available 2014-04-25T21:17:52Z
dc.date.issued 4/25/2014
dc.identifier.uri http://hdl.handle.net/2097/17569
dc.description.abstract Herbicide options for weed control in millets are very limited and hence there is a need for exploring potential herbicides. Field trials were conducted at three locations in Kansas and Nebraska in 2009 to evaluate foxtail millet, proso millet, and pearl millet tolerance to saflufenacil applied preemergence (PRE) at 36, 50, and 100 g aihaˉ¹. Foxtail millet was the most sensitive of the three millets to saflufenacil. Among experimental sites, saflufenacil at 36 g haˉ¹ injured foxtail millet 59 to 99% and reduced plant stands 41 to 95%; nearly all plants died at 100 g haˉ¹. Despite early season foliar injury and up to 36% stand reduction, fodder or grain yields of proso and pearl millets were not reduced by any rate of saflufenacil compared to untreated controls. Additional trials were conductedat four locations in Kansas, Nebraska and South Dakota in 2010 and 2011 to refine saflufenacil use rate (36 and 50 g haˉ¹) and application timing [14 days early preplant (EPP); 7 days preplant (PP); and PRE] for use in proso and pearl millets. Saflufenacil applied EPP or PP, regardless of rate, caused up to 21 and 6% foliar injury and up to 21 and 9% plant stand reduction in proso and pearl millets, respectively. However, yields were not reduced by EPP or PP treatments in either milletcrop. PRE applications of saflufenacil caused the highest crop injury and stand reduction in both millets. Saflufenacil PRE at 36 g haˉ¹ caused up to 57 and 40% foliar injury and up to 42 and 24% stand reductions in proso and pearl millets, respectively; however, yields were not affected. Comparatively, saflufenacil PRE at 50 g haˉ¹ reduced yields of proso and pearl millets 36 and 52%, respectively, on sandy loam soilswith high pH (8.3) and low organic matter content (1.1%).Overall, results indicated that foxtail millet lacks tolerance to saflufenacil, but up to 50 g haˉ¹ of saflufenacil maybe safely applied as near as 7 days before planting proso or pearl millets. If situation demands, saflufenacil at 36 g haˉ¹ can also be applied PRE to either crop with risk of some crop injury. en_US
dc.language.iso en_US en_US
dc.relation.uri http://www.sciencedirect.com/science/article/pii/S0261219413003177 en_US
dc.subject Crop injury en_US
dc.subject Herbicide en_US
dc.subject Millets en_US
dc.subject Preemergence en_US
dc.subject Preplant en_US
dc.subject Saflufenacil en_US
dc.subject Weed management en_US
dc.title Tolerance of foxtail, proso and pearl millets to saflufenacil en_US
dc.type Article (author version) en_US
dc.date.published 2014 en_US
dc.citation.doi doi:10.1016/j.cropro.2013.12.002 en_US
dc.citation.epage 62 en_US
dc.citation.jtitle Crop Protection en_US
dc.citation.spage 57 en_US
dc.citation.volume 57 en_US
dc.contributor.authoreid stahlman en_US
dc.contributor.authoreid pgeier en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search K-REx


Advanced Search

Browse

My Account

Statistics








Center for the

Advancement of Digital

Scholarship

118 Hale Library

Manhattan KS 66506


(785) 532-7444

cads@k-state.edu