Self-organized nanoporous materials for chemical separations and chemical sensing

Abstract

Self-organized nanoporous materials have drawn a lot of attention because the uniform, highly dense, and ordered cylindrical nanopores in these materials provide a unique platform for chemical separations and chemical sensing applications. Here, we explore self-organized nanopores of PS-b-PMMA diblock copolymer thin films and anodic gallium oxide for chemical separations and sensing applications. In the first study, cyclic voltammograms of cytochrome c on recessed nanodisk-array electrodes (RNEs) based on nanoporous films (11, 14 or 24 nm in average pore diameter; 30 nm thick) derived from polystyrene-poly(methylmethacrylate) diblock copolymers were measured. The faradic current of cytochrome c was observed on RNEs, indicating the penetration of cytochrome c (hydrodynamic diameter ≈ 4 nm) through the nanopores to the underlying electrodes. Compared to the 24-nm pores, the diffusion of cytochrome c molecules through the 11- and 14-nm pores suffered significantly larger hindrance. The results reported in this study will provide guidance in designing RNEs for size-based chemical sensing and also for controlled immobilization of biomolecules within nanoporous media for biosensors and bioreactors. In another study, conditions for the formation of self-organized nanopores of a metal oxide film were investigated. Self-organized nanopores aligned perpendicular to the film surface were obtained upon anodization of gallium films in ice-cooled 4 and 6 M aqueous H2SO4 at 10 V and 15 V. The average pore diameter was in the range of 18 ~ 40 nm, and the anodic gallium oxide was ca. 2 µm thick. In addition, anodic formation of self-organized nanopores was demonstrated for a solid gallium monolith incorporated at the end of a glass capillary. Nanoporous anodic oxide monoliths formed from a fusible metal will lead to future development of unique devices for chemical sensing and catalysis. In the final study, surface chemical property of self-organized nanoporous anodic gallium oxide is explored through potentiometric measurements. The nanoporous anodic and barrier layer gallium oxide structures showed slow potentiometric response only at acidic pH (≤ 4), in contrast to metallic gallium substrates that exhibited a positive potentiometric response to H⁺ over the pH range examined (3-10). The potentiometric response at acidic pH probably reflects some chemical processes between gallium oxide and HCl.